| No. | Brand | B | d | A | Q | X | a | G | N |
| 60.20.0544.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0560.101.21.1503 | Standard 5 | 8 mm | 12 mm | - | - | - | - | - | - |
| 3R8-110N1 | Rotek | 18 mm | 55 mm | - | - | - | - | - | - |
| 3R10-98N1B | Rotek | - | - | - | - | - | - | - | - |
| R9-55E3 | Rotek | - | - | - | - | - | - | - | - |
| 60.22.0575.502.11.1503 | Standard 5 | 101.600 mm | 1016.000 mm | - | - | - | - | - | - |
| 250.15.0475.013 Type 13/5 | Standard 5 | 45 mm | 150 mm | - | - | - | - | - | - |
| R8-46N3 | Rotek | - | - | - | - | - | - | - | - |
| 3R6-55E9 | Rotek | - | - | - | - | - | - | - | - |
| 3R16-245N1 | Rotek | 10 mm | 80 mm | - | - | - | - | - | - |
| 3R8-98N9 | Rotek | - | - | - | - | - | - | - | - |
| 60.20.0744.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.21.0475.013 Type 21/520.1 | Standard 5 | 36 mm | 105 mm | - | - | - | 44.5 mm | - | - |
| 232.21.0475.013 Type 21/520.2 | Standard 5 | - | - | - | - | - | - | - | - |
| R11-71E3 | Rotek | - | - | - | - | - | - | - | - |
| 232.20.0400.503 Type 21/520.2 | Standard 5 | - | 60 mm | - | - | - | - | - | - |
| 62.20.0744.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R13-62N1E | Rotek | 31 mm | 60 mm | - | - | - | - | - | - |
| 62.20.0450.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0450.101.21.1503 | Standard 5 | - | 160 mm | - | - | - | - | - | - |
| R9-59N3 | Rotek | - | - | - | - | - | - | - | - |
| 62.20.0644.500.01.1503 | Standard 5 | - | - | 95.00 mm | - | - | - | M12 | - |
| 232.21.0875.013 Type 21/950.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 250.14.0300.013 Type 13/4 | Standard 5 | 26.000 mm | - | - | - | - | - | - | - |
| 3R16-248E1 | Rotek | 21.430 mm | - | - | - | - | - | - | - |
| L9-57N9Z | Rotek | - | - | - | - | - | - | - | - |
| 232.20.0600.013 Type 21/750.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0800.503 Type 21/950.1 | Standard 5 | 90 mm | 420 mm | - | - | - | - | - | - |
| 231.20.0700.503 Type 21/850.1 | Standard 5 | - | 100 mm | - | - | - | - | - | - |
| 3R16-265N3 | Rotek | - | - | - | - | - | - | - | - |
| 250.15.0375.013 Type 13/4 Standard 5 Slewing Ring Bearings | Dynamic Load Rating:37,000 N; Configuration:Single Row; Radial Clearance:0.030 to 0.058 mm; ra (max):1 mm; Limiting Speed - Grease:4,500 rpm; Snap Ring Width:1.7 mm; da (min):106 mm; Factor fo:16.5; B:20 mm; Dx (min):147 mm; d:100 mm; Enclosure:Single Shield with S; D1 (max):137.6 mm; Weight:0.780 kg; Snap Ring Outside Diameter:145.7 mm; Fillet Radius/Chamfer:1.1 mm; Cy (max):4.7 mm; a (max):3.3 mm; |
| L9-46E9Z Rotek Slewing Ring Bearings | Radial Clearance:0.370 to 0.500 mm; Groove Width A:45 mm; Fillet Radius/Chamfer:6 mm; Limiting Speed - Grease:540 rpm; da (min):448 mm; Center Guidance:Fixed Inner Ring Rib; D:700 mm; Nr. of Holes:8; Hole Diameter (do):20 mm; Roller Profile:Symmetric; B:280 mm; Constant e:0.40; ra (max):5 mm; Axial Load Factor Y1:1.68; Da (max):672 mm; Static Load Rating:12,000,000 N; Axial Load Factor Y0:1.64; Dynamic Load Rating:8,350,000 N; |
| 162.20.0710.890.11.1503 Standard 5 Slewing Ring Bearings | Configuration:Single Row; d:80 mm; D:125 mm; Groove Diameter:120.2 mm; Factor fo:15.6; Bore Type:Cylindrical Bore; Weight:0.825 kg; Groove Width:3.1 mm; Enclosure:Open; Da (max):119 mm; Cy (max):5.3 mm; Dx (min):136.5 mm; ra (max):1 mm; r1:0.5 mm; Limiting Speed - Grease:5,300 rpm; B:22 mm; Static Load Rating:39,500 N; Radial Clearance:0.025 to 0.051 mm; da (min):86 mm; Limiting Speed - Oil:6,300 rpm; |
| 162.25.0764.891.21.1503 Standard 5 Slewing Ring Bearings | Dimension H:150 mm; Cor - Static Load Rating:95993 lbf; Dimension M:130 mm; Bearing Type:Split Cylindrical Re; Dimension L:445 mm; Bearing Number:LSM115BR; Seal Type:Felt Type; Support Type:Two-Bolt Plummer Blo; Dimension H2:310 mm; Shaft Size:115 mm; Cr - Dynamic Load Rating:71040 lbf; Bearing UPC:013992028044; Dimension J:380 mm; Ca - Axial Load Rating:4181.39 lbf; Maximum Speed:1970 rpm; Series Type:Light Series; |
| R9-55E3 Rotek Slewing Ring Bearings | Locking Style:Tapered Adapter; Dimension F:7.44 in; Shaft Tolerance:0.0040 in; e - Geometry Factor:0.23; C - Dynamic Load (Basic):66900 lb; Adapter Sleeve Axial Movement Min:0.027 in; Dimension H:1.06 in; Dimension E:6.000 in; Pre Install Clearance Min:0.0043 in; Shaft Size Type:Imperial; Engineering Group:Mounted Bearing; Int Radial Clearance Reduction Max:0.0025 in; Dimension S:3.23 in; Housing Style:Four-Bolt Square Fla; |
| A10-47E1 Rotek Slewing Ring Bearings | Grease Lubrication - M/N Seal:650 rpm; e - Geometry Factor:0.25; Dimension SVV:7.02 in; Full Timken Part Number:QVVPH28V125SB; C0 - Static Load:237000 lb; Dimension RVV:1.25 in; Y1 - Geometry Factor:2.67; Locking Style:Double V-Lock; Engineering Group:Mounted Bearing; Dimension G:5.040 in; Dimension L:6.02 in; Shaft Size :125 mm; Grease Lubrication - B/C/O Seal:350 rpm; Dimension C:7.48 in; |
| H8-54N1 Rotek Slewing Ring Bearings | Design Units:Imperial; Series:39500; Y1 - ISO Factor9:1.99; Aa - Cage-Cone Backface Clearance:0.05 in; db - Cone Backface Backing Diameter:2.44 in; Da - Cup Frontface Backing Diameter:4.25 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:5650 lbf; Ab - Cage-Cone Frontface Clearance:0.13 in; C - Double Cup Width:2.1875 in; r - Cup Frontface To Clear Radius2:0.03 in; Cone Part Number:39573; |
| S14-80E1 Rotek Slewing Ring Bearings | Cg - Geometry Factor8:0.0941; Reference Thermal Speed Rating (Grease):1200; Bearing Weight:30.00 Kg; Cage Material:Brass; Y0 - ISO Factor4:2.06; D:290.000 mm; C0 - Static Radial Rating:1940000 N; Reference Thermal Speed Rating (Oil)7:1400; UPC Code:087796068919; C1(2) - Dynamic Radial Rating (Two-Rows):1470000 N; d:160 mm; B - Outer Ring Width:104.000 mm; e - ISO Factor3:0.33; Cage Type:EM; Da - Outer Ring Backing Diameter:264.000 mm; |
| 161.20.0450.891.21.1503 Standard 5 Slewing Ring Bearings | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:54300 lbf; Design Units:Imperial; a - Effective Center Location4:-0.18 in; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (1 million revolutions)6:31200 lbf; G2 - Heat Generation Factor (Rib-Roller End):21.3; C0 - Static Radial Rating:43000 lbf; G1 - Heat Generation Factor (Roller-Raceway):75.2; B - Cone Width:1.1830 in; Cg - Geometry Factor:0.109; |
| 3R16-197E2 Rotek Slewing Ring Bearings | Weight:85.5 lb; Bearing Type:Thrust Tapered Rolle; r - Fillet Radius Housing (Max):0.31 in; D - Bearing O.D.:12.5000 in; Static Load Rating:1530000 lbf; Dynamic Load Rating:106200 lbf; Bearing Configuration:Thrust TTHD - with c; R - Fillet Radius Shaft (Max):0.31 in; B:3.5000 in; d - Bore Diameter:6.0000 in; |
| A20-72N5A Rotek Slewing Ring Bearings | t:1.2 mm; Locknut:KM 09; Weight:15 g; D4:56 mm; No. of Tangs:17; E:6 mm; S:5 mm; k:42.5 mm; D5:69 mm; D1:45 mm; |
| 62.20.0560.001.21.1503 Standard 5 Slewing Ring Bearings | Bearing:22218; L:345.00 mm; Shaft Diameter db:100 mm; Material :Cast Iron; J1:58 mm; C1 Dynamic Load Rating:355; C0 Static Load Rating:388; N:18 mm; Housing:FSNT 218; Shaft Diameter da:90 mm; Bolt Qty:2; H:194 mm; Cage Type:EJ; N1:24.00 mm; J:280.00 mm; Max Oil Speed:4000; Housing Mass:13.1 Kg; Max Grease Speed:3300; Locating Rings (width x OD):SR160X12.5; G:M20; |